A-B 1794-ACNR15XT/D 适配器模块 是一个由艾伦-布拉德利设计和制造的Flex I/O ControlNet适配器模块。这款适配器模块被特别批准用于那些不太可能经常出现蒸汽、薄雾和气体的危险场所。
A-B 1794-ACNR15XT/D 适配器模块 详情介绍：
AB 1794-ACNR15XT/D 适配器模块是一个由艾伦-布拉德利设计和制造的Flex I/O ControlNet适配器模块。这款适配器模块被特别批准用于那些不太可能经常出现蒸汽、薄雾和气体的危险场所。
关于其操作，需要注意的是，在危险场所断开此适配器之前，必须首先断开电源。此外，除非模块电源也已断开，否则也不应断开模块的连接。为了保持模块的清洁和防止静电放电，应使用柔软的防静电布进行清洁，并避免使用清洁剂。
AB 1794-ACNR15XT/D 适配器的尺寸为87.4 x 94 x 92毫米，重量约为220克。在19.2伏DC的电压下，其峰值功耗为3.4瓦。此外，模块上提供了用于显示2个通信端口状态和I/O状态的指示器。推荐的通信电缆为百通RG-6/U电缆，其中3类电线应用于电源端口，而2类电线应用于通信端口。
在连接电源时，应使用22至12 AWG的实心/绞合铜线，并确保端子螺钉扭矩不超过7磅/英寸。此模块在19.2至31.2伏DC的直流输入电压下运行。
请注意，对于AB 1794-ACNR15XT/D 适配器模块的具体使用方法和注意事项，建议查阅相关手册或联系专业人员进行咨询，以确保安全和正确的使用。
A-B 1794-ACNR15XT/D 适配器模块 实物图片：
A-B 1794-ACNR15XT/D 适配器模块 实物视频
A-B 1794-ACNR15XT/D adapter module details introduction:
The AB 1794-ACNR15XT/D adapter module is a Flex I/O ControlNet adapter module designed and manufactured by Allen Bradley. This adapter module is specifically approved for use in hazardous areas where steam, mist, and gases are unlikely to occur frequently.
Regarding its operation, it should be noted that before disconnecting this adapter in hazardous areas, the power must be disconnected first. In addition, the module should not be disconnected unless the power supply to the module has also been disconnected. To maintain the cleanliness of the module and prevent electrostatic discharge, a soft anti-static cloth should be used for cleaning, and the use of cleaning agents should be avoided.
The size of the AB 1794-ACNR15XT/D adapter is 87.4 x 94 x 92 millimeters and weighs approximately 220 grams. At a voltage of 19.2 volts DC, its peak power consumption is 3.4 watts. In addition, indicators are provided on the module to display the status of two communication ports and I/O status. The recommended communication cable is the Baitong RG-6/U cable, with Class 3 wires used for power ports and Class 2 wires used for communication ports.
When connecting to the power supply, use solid/twisted copper wire of 22 to 12 AWG and ensure that the terminal screw torque does not exceed 7 pounds per inch. This module operates at a DC input voltage of 19.2 to 31.2 volts DC.
Please note that for the specific usage and precautions of the AB 1794-ACNR15XT/D adapter module, it is recommended to consult relevant manuals or contact professional personnel for consultation to ensure safe and correct use.
A-B 1794-ACNR15XT/D 适配器模块 相关产品：
A-B 1756-OW16I A Controller Module
A-B 1756-IF16 A Industrial Control Modul
| CU833-002 | AMAT 0100-76290 | HESG223044R0001 PT8153B-E |
| PC843-XYZ-A | AMAT 0100-02734 | HESG446212R0001] 70AA01A-E |
| PC843-001-T | AMAT 0100-00455 | HESG447388R0001] 70AA02B-E |
| PC844-XYZ-F | AMAT 0100-91040 | HESG447224R0002 70AB01C-ES |
| PCE845-XYZ-A | AMAT 0100-00054 | HESG446933R0002 70AB02B-E |
