邮箱:xiamen2018@foxmail.com

手机/微信/WhatsApp

+86 15270269218

MVAX31C1DF0754A模块

发布时间:2024-06-05人气:
  • MVAX31C1DF0754A模块
  • MVAX31C1DF0754A模块
  • MVAX31C1DF0754A模块
  • MVAX31C1DF0754A模块

MVAX31C1DF0754A模块事一种通用机械驱动器,与磁流量计相关联。这种类型的设备通常用于测量管道中流体的流量,特别是在需要高精度和低压力损失的应用中。

MVAX31C1DF0754A模块产品图片展示

MVAX31C1DF0754A (4).jpg

MVAX31C1DF0754A模块产品实物视频

MVAX31C1DF0754A模块特点和注意事项

特点:

宽开孔设计:磁流量计的管路内部设计为无阻塞,这意味着流体通过时几乎不会遇到阻力,从而产生极低的压力损失。
上游和下游直管要求:为了获得最佳的测量精度,需要在流量计前后保持一定长度的直管段,通常上游需要5倍直径的直管,下游需要3倍直径的直管。
高精度测量:磁流量计利用电磁感应原理测量流体的体积流量,具有较高的测量精度和重复性。
非侵入式测量:由于流体路径中没有物理障碍,因此磁流量计不会对流体造成污染或损害。
适用广泛:适用于导电液体,如水、污水、化学溶液等。
注意事项:
安装位置:确保流量计安装在满足直管段要求的位置,以确保测量的准确性。
流体特性:确认被测流体的导电性,磁流量计只适用于导电液体。
环境因素:考虑环境温度和压力,确保它们在流量计的工作范围内。
维护与清洁:定期检查和清理流量计,特别是当处理含固颗粒的流体时,以防止沉积物积累影响测量。
校准:定期进行校准,确保测量精度随时间保持稳定。
电磁干扰:避免在强电磁场附近安装,以免影响测量结果。

Features:

Wide opening design: The internal design of the pipeline of the magnetic flowmeter is unobstructed, which means that there is almost no resistance when the fluid passes through, resulting in extremely low pressure loss.

Upstream and downstream straight pipe requirements: In order to achieve optimal measurement accuracy, a certain length of straight pipe section needs to be maintained before and after the flow meter. Typically, a straight pipe with a diameter of 5 times is required upstream, and a straight pipe with a diameter of 3 times is required downstream.

High precision measurement: Magnetic flow meters use the principle of electromagnetic induction to measure the volume flow rate of fluids, with high measurement accuracy and repeatability.

Non intrusive measurement: Due to the absence of physical obstacles in the fluid path, the magnetic flowmeter will not cause contamination or damage to the fluid.

Widely applicable: suitable for conductive liquids such as water, sewage, chemical solutions, etc.

Notes:

Installation position: Ensure that the flowmeter is installed in a position that meets the requirements of the straight pipe section to ensure measurement accuracy.

Fluid characteristics: Confirm the conductivity of the measured fluid, magnetic flow meters are only suitable for conductive liquids.

Environmental factors: Consider environmental temperature and pressure to ensure they are within the working range of the flowmeter.

Maintenance and cleaning: Regularly inspect and clean the flow meter, especially when dealing with fluids containing solid particles, to prevent sediment accumulation from affecting measurements.

Calibration: Regularly calibrate to ensure measurement accuracy remains stable over time.

Electromagnetic interference: Avoid installing near strong electromagnetic fields to avoid affecting measurement results.

MVAX31C1DF0754A模块相关产品推荐


ALSTOM V0701596-001102 控制器模ALSTOM EP3-E-4-A 电除尘控制器
ALSTOM AB121 可控制编程模块ALSTOM AH116-2 伺服驱动器


推荐资讯

+86 15270269218