3500/40M 位移振动监视器

3500/40M 模块是一款四通道监视器，设计用于监测旋转机械的振动和位移。

3500/40M 位移振动监视器产品图片展示

3500/40M 位移振动监视器实物视频展示

3500/40M 位移振动监视器特点和注意事项

特点

characteristic

Four channel design: The 3500/40M module has four independent channels, each of which can be configured and monitored independently.

Multiple monitoring functions: Each channel can be configured to monitor various mechanical state parameters such as radial vibration, axial displacement, differential expansion, and shaft eccentricity.

Programmable alarms: The module can set user programmable alarm and trip points, automatically triggering alarms when the monitored parameters exceed the preset range.

Software configuration: Users can use the 3500 Rack Configuration software to configure the 3500/40M module, including alarm settings, channel configuration, etc.

Interface module: The module may include internal terminals for easy connection and management of sensor signals.

Data communication: The 3500/40M module can communicate with other systems (such as DCS and SCADA), providing real-time monitoring data and alarm information.

matters needing attention

Sensor connection: Ensure that proximity sensors or other monitoring sensors are correctly connected to the module to avoid signal distortion caused by wiring errors.

Parameter configuration: Before use, it is necessary to correctly configure the parameters of each channel, including monitoring type, alarm threshold, etc., to match the characteristics of the monitored device.

Environmental conditions: Ensure that the module is installed in an environment that meets its operating temperature and humidity requirements, avoiding the impact of extreme environmental conditions on module performance.

Maintenance and calibration: Regularly maintain and calibrate modules to ensure the accuracy and reliability of monitoring data.

Software Update: Use the latest software version compatible with the module to ensure optimal performance and functionality.

Fault handling: When encountering technical problems, refer to the manufacturer's troubleshooting guide for handling, and if necessary, contact professional technical personnel or Bently Nevada technical support.

Safe operation: Before carrying out any maintenance or modification, make sure to cut off the power and comply with electrical safety regulations.

3500/40M 位移振动监视器相关产品推荐