TRICONEX 3501TN2频率和脉冲量采集模块

TRICONEX 3501TN2 模块是一款频率和脉冲量采集模块。

TRICONEX 3501TN2频率和脉冲量采集模块图片展示

TRICONEX 3501TN2频率和脉冲量采集模块视频展示

TRICONEX 3501TN2频率和脉冲量采集模块特点和注意事项

特点：

Features:

Frequency and pulse measurement: capable of measuring frequency and pulse signals, suitable for signal acquisition in sensors such as rotary encoders, flow meters, etc.

8 input channels: There are a total of 8 input channels, each of which can be configured for frequency measurement or pulse counting.

High isolation voltage: With an isolation voltage of 400V, it provides safety protection for the system and operators.

Schmidt comparator input: The Schmidt comparator technology is used to improve the anti-interference ability of the input signal.

Wide frequency measurement range: The frequency measurement range is from 0 to 64kHz, suitable for measuring various frequency signals.

High frequency measurement accuracy: The frequency measurement accuracy reaches 1Hz, ensuring the accuracy and reliability of the measurement.

Large pulse counting ability: The maximum pulse counting value is 4G, capable of processing high-frequency pulse signals.

Software configurability: Channel functions can be configured through software, increasing module flexibility.

Notes:

Installation environment: Ensure that the module is installed in a suitable environment, avoiding high temperature, high humidity, corrosive gases, and strong vibrations to maintain the performance and lifespan of the module.

Electrical connection: Connect the power and signal lines correctly, follow the manufacturer's wiring guidelines, and avoid electrical short circuits or signal interference.

Input signal range: Ensure that the input signal is within the specified voltage range (200mV to 20V) to avoid damaging the module.

System configuration: According to specific application requirements, correctly configure module parameters, including channel mode, measurement range, etc.

Maintenance and Inspection: Regular maintenance should be carried out to keep the modules clean, check if the connectors and wiring are intact, and ensure good electrical contact.

Safe operation: Follow all safety regulations, especially when dealing with high-voltage power sources and high currents, to avoid personal injury or equipment damage.

Technical Support: If you encounter any technical issues, you should promptly contact TRICONEX's technical support team or authorized service provider to avoid attempting to repair any further damage that may occur.

TRICONEX 3501TN2频率和脉冲量采集模块