Triconex 3624 数字输出模块

Triconex 3624 数字输出模块

1.产 品 资 料 介 绍：

中文资料：

Triconex 3624 是 Tricon 系列中的一款数字输出模块，设计用于支持高可靠性、实时响应的工业自动化和安全仪表系统（SIS）。作为关键组件，它能够执行数字信号的输出控制，确保系统能准确响应和控制过程。

主要技术参数：

1. 输出类型：

   • 数字输出： 提供稳定的开关输出，适用于各类设备的控制需求。
   • 输出通道数： 通常为 8 或 16 通道，具体型号可能有所不同。

2. 输出规格：

   • 每个输出通道通常支持 24 V DC 继电器输出或晶体管输出，能直接驱动负载。
   • 具有短路保护、过载保护和过压保护功能，增强了安全性。

3. 冗余设计：

   • 该模块支持热插拔冗余设计，确保在发生故障时不会影响系统运行。
   • 双电源输入： 提供更高的可靠性，避免单电源故障时对系统的影响。

4. 通信协议：

   • 通常与 Triconex 系统的主控单元通过高速通信协议连接（如 TCM、Triconex ControlNet 或其他专用网络），保证高速和可靠的数据交换。

5. 诊断功能：

   • 自我诊断： 内建自诊断机制，可实时监控输出状态，并在发生故障时通知控制系统。
   • 报警机制： 如果模块输出出现故障，能及时报告，减少系统停机时间。

环境和电源要求：

• 工作温度： -20°C 至 +60°C（具体工作环境温度根据应用可能有所不同）。
• 湿度： 模块可承受高达95%的湿度。
• 电源要求： 通常使用 24V DC 电源供电，但具体电压值应参照产品规格书确认。

英文资料：

The Triconex 3624 is a digital output module in the Tricon series designed to support high reliability, real-time response industrial automation and safety instrumented systems (SIS). As a key component, it can perform output control of digital signals, ensuring that the system can accurately respond and control the process.

Main technical parameters:

Output type:

Digital output: Provides stable switch output, suitable for control needs of various devices.

Number of output channels: usually 8 or 16 channels, specific models may vary.

Output specifications:

Each output channel typically supports 24V DC relay output or transistor output, which can directly drive the load.

It has short-circuit protection, overload protection, and overvoltage protection functions, enhancing safety.

Redundant design:

This module supports hot swappable redundancy design to ensure that system operation is not affected in the event of a failure.

Dual power input: Provides higher reliability and avoids the impact on the system in the event of a single power failure.

Communication protocol:

Usually connected to the main control unit of the Triconex system through high-speed communication protocols (such as TCM, Triconex ControlNet, or other dedicated networks), ensuring high-speed and reliable data exchange.

Diagnostic function:

Self diagnosis: Built in self diagnosis mechanism, which can monitor the output status in real time and notify the control system when a fault occurs.

Alarm mechanism: If there is a malfunction in the module output, it can be reported in a timely manner to reduce system downtime.

Environmental and power requirements:

Working temperature:- 20 ° C to+60 ° C (specific working environment temperature may vary depending on the application).

Humidity: The module can withstand up to 95% humidity.

Power requirements: Typically, a 24V DC power supply is used for power supply, but the specific voltage value should be confirmed in accordance with the product specifications.

2.产      品      展      示      

3.其他产品

ATLAS COPCO TC-4000-S-ES伺服控制器

ASYST ETON ET866 94V-0 独立显卡

Advantech PCL-81601采集板

4.其他英文产品

ASEA 57360001-AN circuit board

Kollmorgen 6SM37M-6000 servo motor

Radisys ATCA-PP81 controller module