MMS6210 双通道轴位移测量模块

MMS6210 模块是由EPRO生产的双通道轴位移测量模块，专门设计用于监测旋转机械（如涡轮机、压缩机等）的轴向位移，以预防潜在的机械故障和提高设备的可靠性。

MMS6210 双通道轴位移测量模块产品图片展示

MMS6210 双通道轴位移测量模块视频展示

MMS6210 双通道轴位移测量模块特点和注意事项

特点：

Features:

Dual channel measurement: The module has two independent measurement channels that can simultaneously monitor axial displacement in both directions.

Axial displacement and differential expansion monitoring: In addition to axial displacement, it can also monitor the differential expansion of the shaft (relative changes in thermal expansion of the shaft relative to the bearing seat).

Redundant power input: Provides two 24V power inputs, increasing system reliability.

Built in processor: The module contains a processor internally for data processing and control functions.

On site installation: designed for on-site installation to reduce interference in signal transmission.

DC signal transmission: Using DC signal transmission, less susceptible to electromagnetic interference.

Expanded self check function: The module has self check function, which can detect its own health status, including sensor self check.

Communication interface: equipped with RS232/485 ports for on-site configuration and communication with other systems.

Eddy Current Sensor Compatibility: Suitable for the PR642./. series of eddy current sensors, used in conjunction with the Proximitor CON0X1.

Linearization function: Built in linearization function for signal calibration and standardization.

Notes:

Sensor selection and installation: Ensure that the selected eddy current sensor and preamplifier are compatible with MMS6210 and install according to the manufacturer's instructions.

Power stability: Use a stable power supply to avoid voltage fluctuations that may affect the performance of the module.

Environmental conditions: Pay attention to the environmental requirements of the module, such as temperature, humidity, etc., to ensure operation in a suitable environment.

Wiring and grounding: Proper wiring should be carried out, including the connection of sensor signal lines, power lines, and communication lines, while paying attention to good grounding.

Maintenance and calibration: Regularly maintain and calibrate modules to ensure measurement accuracy.

Software updates: If the module supports software updates, make sure to use the latest firmware version.

Operating manual: Before installation and use, it is essential to read and understand the manufacturer's provided operating manual.

Safe operation: Follow all safety operating procedures, especially when working near high-pressure or high-speed equipment.

MMS6210 双通道轴位移测量模块相关产品推荐