邮箱:xiamen2018@foxmail.com

手机/微信/WhatsApp

+86 15270269218

VMIVME2170A 32位光学隔离数字输出板

发布时间:2024-06-03人气:
  • VMIVME2170A 32位光学隔离数字输出板
  • VMIVME2170A 32位光学隔离数字输出板
  • VMIVME2170A 32位光学隔离数字输出板

VMIVME2170A是一款高性能的32位光学隔离数字输出模块。

VMIVME2170A 32位光学隔离数字输出板产品图片展示

GE VMIVME2170A (1).jpg

VMIVME2170A 32位光学隔离数字输出板产品视频展示

VMIVME2170A 32位光学隔离数字输出板产品特点应用和注意事项

特征:

32个光学隔离输出

2.5或300 mA输出

外部提供上拉电压,实现最大隔离

现场可配置的上拉电阻器

具有低电流选项的源或汇输出能力

高输出电压耐受30 V正常模式

高隔离电位;1 kV持续,6 kV脉冲

正或负真选项

8或16位数据传输

板上DIP开关提供14位板地址选择

带前面板的双欧洲卡格式

字段可选的非特权或监督性短I/O传输

Features:
32 optically isolated outputs
2.5 or 300 mA outputs
Externally supplied pull-up voltage for maximum isolation
Field-configurable pull-up resistors
Source or sink output capability with low current option
High output voltage tolerance to 30 V normal mode
High isolation potential; 1 kV sustained, 6 kV pulsed
Positive or negative true options
8- or 16-bit data transfers
On-board DIP switches provide 14-bit board address selection
Double Eurocard format with front panel
Field-selectable nonprivileged or supervisory short I/Otransfers

应用:

VMEbus的数字控制

消除系统接地回路

高电噪声环境中的控制

多个潜在系统组件的控制

Applications:
Digital control from VMEbus
Elimination of system ground loops
Control in high-electrical noise environments
Control of multiple-potential system components 

注意事项:
电源要求:确保为VMIVME2170A提供稳定、符合规格的电源,避免电压波动影响输出性能和模块寿命。
接地规范:正确接地,遵守VME总线的接地原则,防止接地不良引起的干扰或损坏。
散热考虑:由于高功率输出,使用时需关注模块及其周围环境的散热情况,必要时采取额外散热措施。
输入信号兼容性:确认外部设备的信号类型、电压和电流要求与VMIVME2170A的输出规格相匹配,防止不兼容导致的问题。
静电防护:在安装和维护过程中,采取必要的静电防护措施,避免静电损坏模块内部的光学耦合器等敏感元件。
软件配置:正确配置系统软件以控制和监控输出通道,遵循产品手册中的编程指南和接口说明。

定期维护:定期检查模块的工作状态和连接稳定性,及时清理灰尘,确保长期稳定运行。

Notes:

Power requirements: Ensure stable and compliant power supply for VMIVME2170A to avoid voltage fluctuations affecting output performance and module lifespan.

Grounding specifications: Correctly grounding, following the grounding principles of VME bus, to prevent interference or damage caused by poor grounding.

Heat dissipation consideration: Due to high power output, attention should be paid to the heat dissipation of the module and its surrounding environment during use, and additional heat dissipation measures should be taken if necessary.

Input signal compatibility: Confirm that the signal type, voltage, and current requirements of external devices match the output specifications of VMIVME2170A to prevent issues caused by incompatibility.

Static electricity protection: During installation and maintenance, necessary static electricity protection measures should be taken to avoid damage to sensitive components such as optical couplers inside the module caused by static electricity.

Software configuration: Properly configure the system software to control and monitor output channels, following the programming guidelines and interface instructions in the product manual.

Regular maintenance: Regularly check the working status and connection stability of the module, clean dust in a timely manner, and ensure long-term stable operation.

VMIVME2170A 32位光学隔离数字输出板相关产品推荐

531X121PCRALG1通用电气汽车和工业系统IS410STCIS2A IS400STCIS2AFF触点输入模块
Mark VIe系列IS420YAICS1B模拟量输入输出模块GE IS420YDIAS1B燃气轮机输入输出模块


推荐资讯

+86 15270269218