Anybus AB7000-C现场总线转换器

Anybus AB7000-C现场总线转换器  是一款现场总线转换器模块或网关，由HMS Industrial Networks（现为HMS Networks）制造。这款转换器主要用于将非联网设备连接到任何主要的现场总线或工业以太网网络上

Anybus AB7000-C现场总线转换器  详情介绍：

Anybus AB7000-C是一款现场总线转换器模块或网关，由HMS Industrial Networks（现为HMS Networks）制造。这款转换器主要用于将非联网设备连接到任何主要的现场总线或工业以太网网络上。以下是Anybus AB7000-C的一些主要特点和功能：

1. 通信协议转换：它能在几分钟内转换几乎所有RS-232/422/485请求/响应或生成/使用协议，例如Modbus RTU、ASCII、DF1等。这意味着您可以使用AB7000-C将使用这些协议的设备连接到其他类型的网络。
2. 便捷的保存/加载功能：AB7000-C具有便捷的保存/加载功能，意味着一个完整的配置可以重复用于许多其他安装，从而节省了设置和配置的时间。
3. 任意总线配置管理器：这款转换器配备了“任意总线配置管理器”，具有灵活的串行帧构建功能，使得用户可以更灵活地配置和管理设备。
4. 双端口交换式以太网：带有双端口交换式以太网的版本允许菊花链连接，无需外部交换机，进一步简化了网络设置。
5. DIN导轨安装：AB7000-C设计为DIN导轨安装，这使得它在工业环境中易于安装和集成。
6. 电源和温度范围：该转换器采用24 VDC供电，并能在0至55摄氏度的温度范围内正常工作，适用于大多数工业环境。

Anybus AB7000-C在现场总线通信中发挥着重要作用，特别是在需要将旧设备或不支持现代通信协议的设备集成到现代工业自动化系统中时。

Anybus AB7000-C现场总线转换器 实物图片：

Anybus AB7000-C现场总线转换器  实物视频

Details of Anybus AB7000-C fieldbus converter:

Anybus AB7000-C is a fieldbus converter module or gateway manufactured by HMS Industrial Networks (now HMS Networks). This converter is mainly used to connect non networked devices to any major fieldbus or industrial Ethernet network. The following are some of the main features and functions of Anybus AB7000-C:

Communication protocol conversion: It can convert almost all RS-232/422/485 requests/responses or generate/use protocols in a few minutes, such as Modbus RTU, ASCII, DF1, etc. This means that you can use AB7000-C to connect devices using these protocols to other types of networks.

Convenient save/load function: The AB7000-C has a convenient save/load function, which means that a complete configuration can be reused for many other installations, saving time on setup and configuration.

Arbitrary Bus Configuration Manager: This converter is equipped with the Arbitrary Bus Configuration Manager, which has flexible serial frame construction function, allowing users to configure and manage devices more flexibly.

Dual port switched Ethernet: The version with dual port switched Ethernet allows for daisy chain connections without the need for external switches, further simplifying network settings.

DIN rail installation: The AB7000-C is designed for DIN rail installation, making it easy to install and integrate in industrial environments.

Power and temperature range: The converter is powered by 24 VDC and can operate normally in a temperature range of 0 to 55 degrees Celsius, suitable for most industrial environments.

Anybus AB7000-C plays an important role in fieldbus communication, especially when integrating old equipment or devices that do not support modern communication protocols into modern industrial automation systems.

Anybus AB7000-C现场总线转换器  相关产品：

ABB LD800HSE 3BDH000320R02 连接控制器

ABB SCYC51020 58052582G脉冲控制板

ABB NDCU-33CX 3AUA0000052751 I/O Module

ABB APBU-44C 64669982 Fiber Distribution