邮箱:xiamen2018@foxmail.com

手机/微信/WhatsApp

+86 15270269218

VM600 MPC4 200-510-100-034机械保护卡

发布时间:2024-06-04人气:
  • VM600 MPC4 200-510-100-034机械保护卡
  • VM600 MPC4 200-510-100-034机械保护卡
  • VM600 MPC4 200-510-100-034机械保护卡
  • VM600 MPC4 200-510-100-034机械保护卡

VM600 MPC4 200-510-100-034机械保护卡是一款由Vibro-meter(现属于堡盟集团)生产的机械保护卡,主要应用于机械设备的状态监测和保护系统中。

VM600 MPC4 200-510-100-034机械保护卡产品图片展示

Vibro-meter VM600聽MPC4聽200-510-100-034 (5).jpg

VM600 MPC4 200-510-100-034机械保护卡实物视频展示

VM600 MPC4 200-510-100-034机械保护卡产品特点和注意事项

特点:
多通道信号处理:MPC4卡通常能够同时处理多个动态信号输入,可能包括振动、位移、转速等,以及速度输入,增强了系统的监测能力和灵活性。
高精度测量:采用先进的数字信号处理(DSP)技术,提供高精度的信号分析,有助于精确识别设备的异常状态。
可编程报警:用户可以根据设备特性和监测需求,设定报警阈值和逻辑,实现早期故障预警。
滤波器配置:具备可编程的宽带和窄带滤波器,有助于从原始信号中提取有用信息,排除噪声干扰。
同步监测:支持同步振幅和相位监测,在订单跟踪模式下特别有用,有利于诊断旋转机械的不平衡、不对中等问题。
模块化设计:作为VM600系列的一部分,MPC4卡可能支持模块化扩展,易于系统集成和升级。
坚固耐用:设计用于工业环境,具备良好的抗振性和耐久性,可在恶劣条件下长期稳定工作。
注意事项:
正确安装与接线:确保所有连接正确无误,遵循制造商的接线图和安装指南,避免短路或信号干扰。
环境适应性:注意工作环境的温度、湿度、尘埃等条件,确保符合卡片的使用要求,必要时采取防尘、防水措施。
供电要求:确认供电电压和电流稳定,符合卡片的额定值,避免电源波动对系统造成损害。
定期校准与维护:根据使用频率和环境条件,定期进行传感器和卡本身的校准,确保测量精度。
软件兼容性:如果卡需要配合特定的监控软件使用,确保软件版本与卡的固件兼容,及时更新软件以获取新功能和支持。
故障排查:遇到报警或异常读数时,应按照操作手册中的指引进行故障排查,避免误判或忽略真正的问题。
安全操作:在安装、维护或操作过程中,遵守所有安全规范,确保个人和设备安全。

Features:

Multi channel signal processing: MPC4 cards are usually able to process multiple dynamic signal inputs simultaneously, which may include vibration, displacement, speed, etc., as well as speed inputs, enhancing the monitoring ability and flexibility of the system.

High precision measurement: Adopting advanced digital signal processing (DSP) technology, providing high-precision signal analysis, helping to accurately identify abnormal states of equipment.

Programmable alarm: Users can set alarm thresholds and logic based on device characteristics and monitoring needs to achieve early fault warning.

Filter configuration: Equipped with programmable broadband and narrowband filters, it helps to extract useful information from the original signal and eliminate noise interference.

Synchronous monitoring: Supports synchronous amplitude and phase monitoring, which is particularly useful in order tracking mode and helps diagnose imbalances and misalignment issues in rotating machinery.

Modular design: As part of the VM600 series, the MPC4 card may support modular expansion, making it easy to integrate and upgrade the system.

Durable and sturdy: Designed for industrial environments, it has good vibration resistance and durability, and can work stably for a long time under harsh conditions.

Notes:

Correct installation and wiring: Ensure all connections are correct and follow the manufacturer's wiring diagram and installation guidelines to avoid short circuits or signal interference.

Environmental adaptability: Pay attention to the temperature, humidity, dust and other conditions of the working environment to ensure compliance with the requirements for card use. If necessary, take dust-proof and waterproof measures.

Power supply requirements: Confirm that the power supply voltage and current are stable and meet the rated value of the card to avoid power fluctuations causing damage to the system.

Regular calibration and maintenance: According to the frequency of use and environmental conditions, calibrate the sensors and the card itself regularly to ensure measurement accuracy.

Software compatibility: If the card needs to be used with specific monitoring software, ensure that the software version is compatible with the card's firmware, and update the software in a timely manner to obtain new features and support.

Troubleshooting: When encountering alarms or abnormal readings, follow the instructions in the operating manual for troubleshooting to avoid misjudgment or ignoring the real problem.

Safe operation: During installation, maintenance, or operation, comply with all safety regulations to ensure personal and equipment safety.

VM600 MPC4 200-510-100-034机械保护卡相关产品推荐

BERTHOLD LB4460液位计底盘SHINKAWA VM-5Y1-02GEM 1594-005-P001F监测仪
SHINKAWA VM-5N SST-2194-001-P001GSHINKAWA VM-5H3 VM-5P3 VM-5Z4


推荐资讯

+86 15270269218