邮箱:xiamen2018@foxmail.com

手机/微信/WhatsApp

+86 15270269218

MTL831B 温度转换器

发布时间:2024-06-06人气:
  • MTL831B 温度转换器
  • MTL831B 温度转换器
  • MTL831B 温度转换器

MTL831B 温度转换器是一款由MTL(现为HIMA集团的一部分)制造的多路温度转换器,主要应用于危险区域的工业过程控制和监测。这款温度转换器旨在将现场的温度信号转换成可以在安全区域处理的信号格式,同时减少布线成本和提高系统的安全性。

MTL831B 温度转换器产品图片展示

MTL831B  (2).jpg

MTL831B 温度转换器产品实物视频展示

MTL831B 温度转换器产品特点和注意事项


特点:
多路信号转换:MTL831B可以处理多个温度信号,如热电偶或热电阻信号,通过单一的通信线路传输至安全区,从而降低布线成本和复杂性。
本安防爆设计:设计用于0区危险区域,具备本安防爆认证,能够在存在爆炸性气体混合物的环境中安全使用。
信号隔离:MTL831B与MTL838B接收器配合使用时,可以实现信号的隔离,增强系统的安全性和可靠性。
数字通信:采用数字通信方式(如Modbus RTU)将现场温度点的数据传输到控制室,提高了数据的准确性和传输效率。
节省空间:与传统的点对点温度变送器相比,MTL831B可以显著减少所需的机柜空间和转换卡件数量。
成本效益:通过减少电缆铺设和转换硬件的需求,降低了总体安装和维护成本。
注意事项:
正确选型:在选择MTL831B时,需确保其技术规格(如温度测量范围、精度、通信协议等)与应用需求相匹配。
安装环境:确保安装环境符合MTL831B的工作条件,包括温度、湿度和防爆要求。
布线规范:遵循MTL831B的布线指导,正确连接信号线和电源线,避免电磁干扰和信号衰减。
维护与校准:定期进行维护和校准,以保证测量的准确性。在维护时,遵循本安设备的特殊操作规程。
系统兼容性:确认MTL831B与现有控制系统和现场设备的兼容性,确保无缝集成。
安全规程:在危险区域使用MTL831B时,必须严格遵守所有相关的安全规程和标准,包括但不限于防爆和静电放电防护。

Features:

Multi channel signal conversion: MTL831B can process multiple temperature signals, such as thermocouple or thermistor signals, and transmit them to a safe area through a single communication line, thereby reducing wiring costs and complexity.

Intrinsic safety explosion-proof design: designed for use in Zone 0 hazardous areas, with intrinsic safety explosion-proof certification, capable of safe use in environments with explosive gas mixtures.

Signal isolation: When MTL831B is used in conjunction with MTL838B receiver, signal isolation can be achieved, enhancing the safety and reliability of the system.

Digital communication: The use of digital communication methods (such as Modbus RTU) to transmit the data of on-site temperature points to the control room improves the accuracy and transmission efficiency of the data.

Space saving: Compared to traditional point-to-point temperature transmitters, MTL831B can significantly reduce the required cabinet space and number of conversion cards.

Cost effectiveness: By reducing the need for cable laying and hardware conversion, the overall installation and maintenance costs have been reduced.

Notes:

Correct selection: When selecting MTL831B, it is necessary to ensure that its technical specifications (such as temperature measurement range, accuracy, communication protocol, etc.) match the application requirements.

Installation environment: Ensure that the installation environment meets the working conditions of MTL831B, including temperature, humidity, and explosion-proof requirements.

Wiring specifications: Follow the wiring guidelines of MTL831B, correctly connect signal and power lines, and avoid electromagnetic interference and signal attenuation.

Maintenance and calibration: Regular maintenance and calibration are carried out to ensure the accuracy of measurements. During maintenance, follow the special operating procedures for intrinsically safe equipment.

System compatibility: Confirm the compatibility of MTL831B with existing control systems and on-site equipment to ensure seamless integration.

Safety regulations: When using MTL831B in hazardous areas, all relevant safety regulations and standards must be strictly followed, including but not limited to explosion-proof and electrostatic discharge protection.

MTL831B 温度转换器相关产品推荐


PSR-53-7 变频伺服模块MVAJ27T1FB0784D模块
MVAJ23T1GB0774B模块MVAJ23B1AB0757B模块


推荐资讯

+86 15270269218