Pepperl+Fuchs KFU8-DWB-1.D电压保护器

Pepperl+Fuchs  KFU8-DWB-1.D电压保护器

1.产 品 资 料 介 绍：

中文资料：

Pepperl+Fuchs KFU8-DWB-1.D 是一款单通道速度监测信号调理器，适用于检测超速或欠速情况，广泛应用于工业自动化领域。以下是其主要特点：

主要特性

• 电源范围：支持 2090V DC 或 48253V AC，适用于不同电源环境。
• 输入类型：兼容干接点或 NAMUR 传感器，输入频率范围为 1 mHz 至 12 kHz。
• 输出功能：配备两个继电器输出，可用于报警指示或控制。
• 启动覆盖：允许在启动期间设置继电器状态，最长可达 1000 秒。
• 前面板配置：通过设备前部的键盘进行参数调整，操作便捷。
• 线路故障检测 (LFD)：监测线路状态，确保系统安全性。
• 安全等级：符合 IEC/EN 61508 和 IEC/EN 61511 标准，达到 SIL 2 级安全完整性等级。

这款设备适用于需要对旋转速度或运动状态进行监测的工业场景，如电机、输送带、风机等应用。

英文资料：

Pepperl+Fuchs KFU8-DWB-1D is a single channel speed monitoring signal conditioner suitable for detecting overspeed or underspeed situations, widely used in the field of industrial automation. The following are its main characteristics:

Main characteristics

Power range: Supports 2090V DC or 48253V AC, suitable for different power environments.

Input type: compatible with dry contacts or NAMUR sensors, with an input frequency range of 1 mHz to 12 kHz.

Output function: Equipped with two relay outputs, it can be used for alarm indication or control.

Startup Coverage: Allow relay status to be set during startup for up to 1000 seconds.

Front panel configuration: Parameter adjustment can be made through the keyboard on the front of the device, making it easy to operate.

Line Fault Detection (LFD): Monitor the status of the line to ensure system safety.

Safety level: Compliant with IEC/EN 61508 and IEC/EN 61511 standards, reaching SIL 2 safety integrity level.

This device is suitable for industrial scenarios that require monitoring of rotational speed or motion status, such as motors, conveyor belts, fans, and other applications.

2.产      品      展      示      

3.其他产品

BENDER IRDH375B-435 绝缘检测仪

BECKHOFF CX11000001 直流调速器

BECKHOFF CX1020N000控制器

4.其他英文产品

Asea 2668 170-3 Pcb Circuit Board

RADISYS 061-01450-0010 Network Adapter

ABB XVC768115 thyristor module