GE IS200FGPAG1A放大器模块
1.产 品 资 料 介 绍：
中文资料：
IS200FGPAG1A 放大器模块
产品概述
IS200FGPAG1A 是通用电气公司 GE 设计的一款专用于 LS2100 系列静态起动系统的放大器模块 主要用于驱动可控硅的门极信号 并监控其状态 保障电力系统在起动阶段的稳定运行
核心功能
一 控制门极触发
模块接收主控板发出的门极信号 并将其进行功率放大 用于驱动高压可控硅器件
二 状态反馈监测
模块实时反馈 SCR 的导通状态和工作电压值 协助控制系统判断开关状态与故障情况
三 电源电压转换
将输入电源变换为适合内部电路的低压直流供电 用于控制和信号处理
四 系统协同控制
与 LS2100 控制平台中的多个子板共同运行 实现完整的起动控制逻辑
技术参数
适配系统为 LS2100 和 LS2100e
工作电压等级包括 2300V 三相 或 4160V 和 6600V 系统
支持最高六个桥臂结构同步运行
典型安装于桥柜内部 与主控制板通过母线和信号线连接
标准工作温度范围为零下二十度至七十度
模块重量约为零点九千克
模块尺寸为六十一厘米乘五十一厘米乘五十一厘米
应用场景
适用于重型燃气轮机静态起动系统
高压大功率电机驱动系统
工业电厂变频起动控制系统
配合 SCR 驱动模块进行逻辑控制与状态反馈的场合
英文资料：
IS200FGPAG1A amplifier module
product overview
IS200FGPAG1A is an amplifier module designed by General Electric for the LS2100 series static starting system. It is mainly used to drive the gate signal of the thyristor and monitor its status to ensure the stable operation of the power system during the starting phase
Core functions
One control gate trigger
The module receives the gate signal from the main control board and amplifies it to drive high-voltage thyristor devices
Two state feedback monitoring
The module provides real-time feedback on the conduction status and operating voltage value of the SCR to assist the control system in determining the switch status and fault conditions
Three power supply voltage conversion
Transform the input power supply into low-voltage DC power suitable for internal circuits for control and signal processing
Four system collaborative control
Collaborate with multiple sub boards in the LS2100 control platform to achieve complete startup control logic
Technical Parameter
The compatible systems are LS2100 and LS2100e
The working voltage level includes 2300V three-phase or 4160V and 6600V systems
Supports synchronous operation of up to six bridge arm structures
Typically installed inside the bridge cabinet and connected to the main control board through busbars and signal lines
The standard operating temperature range is from minus 20 degrees Celsius to 70 degrees Celsius
The weight of the module is approximately 0.9 kilograms
The module size is 61 centimeters by 51 centimeters by 51 centimeters
Application scenarios
Suitable for heavy-duty gas turbine static starting system
High voltage and high-power motor drive system
Variable frequency starting control system for industrial power plants
In situations where logic control and status feedback are carried out in conjunction with the SCR drive module
2.产 品 展 示
3.其他产品
4.其他英文产品
6ES7313-6BE01-0AB0CentralControllerModule
3BHE039203R0101Processormodule
3BHE039724R0C3Dhigh-performancecontrolsystem
| R65GEAP-R2-NS-NV-00 | R43HEAA-R2-NS-VS-02 | R33GEN0-R2-NS-NV-00 |
| R65GEAA-R2-NS-VS-00 | R24HENA-HS-LB-NV-02 | R43HEBA-R2-NS-VS-00 |
| R65GEAA-R2-NS-NV-00 | SERVOSTAR-603-AS | IMDSO14 |
| R63HMBA-R2-NS-NV-00 | R34JENT-TS-LA-NV-01 | R43HENA-TS-NF-NV-00 |
| R63HENA-R2-NS-VS-00 | R32GENC-HS-ND-NV-00 | S33HSNA-RNNM-02 |
| R63HENA-R2-NS-NV-00 | R46GSNA-HS-NS-NV-03 | S31GNAA-RNNM-00 |
| R63GSSA-HS-SS-NV-03 | R33GENT-TS-NS-NV-00 | R43GENA-R2-NS-NV-00 |
