Schneider 140CRA93100 RIO远程适配器模块

SCHNNEIDER 140CRA93100 RIO远程适配器模块    该模块是远程I/O子站单通道模块，用于在安装在同一RIO子站背板上的I/O模块与CPU背板上的RIO头之间传输数据。它通过同轴电缆网络双向传输数据。

SCHNNEIDER 140CRA93100 RIO远程适配器模块  详情介绍：

1. 施耐德电气Modicon Quantum系列的140CRA93100 RIO子站适配器模块是一款备受推崇的绿色优质产品，不含汞，专为极端条件而设计，可扩大覆盖范围。其主要特点包括：

2. 单根同轴电缆、300mA的总线电流和3W的功耗。
3. 在模块顶部正面有一个LED功能，位于型号和型号说明的正下方。当模块通过上电诊断时，LED功能将显示绿灯。当模块在RIO网络上通信时，Com Act LED显示绿色。有一个红色故障LED，指示无法与一个或多个I/O模块通信。对于通道A上的通信错误，错误A LED显示为红色。最后，故障B LED显示红色，与错误A一起指示无效的节点地址。
4. 在-13至158华氏度的扩展工作温度下保持稳定。此外，该涂层提供保护和绝缘，防止高粉尘环境、化学接触引起的腐蚀、冷凝水滴或湿气的影响。
5. 该模块还获得了ATEX zone 2/22认证，其中包括密集、全面和详细的测试和检查过程。按照这些程序，像这种获得认证的产品也会得到一份报告，概述结果并确认其达到了设定的标准。

6. 该模块是远程I/O子站单通道模块，用于在安装在同一RIO子站背板上的I/O模块与CPU背板上的RIO头之间传输数据。它通过同轴电缆网络双向传输数据。

SCHNNEIDER 140CRA93100 RIO远程适配器模块     实物图片：

SCHNNEIDER 140CRA93100 RIO远程适配器模块    实物视频

SCHNNEIDER 140CRA93100 RIO Remote Adapter Module Details Introduction:

The 140CRA93100 RIO sub station adapter module of Schneider Electric's Modicon Quantum series is a highly respected green and high-quality product, free of mercury, designed specifically for extreme conditions to expand coverage. Its main characteristics include:

Single coaxial cable, 300mA bus current, and 3W power consumption.

There is an LED function on the top front of the module, located directly below the model and model description. When the module passes the power on diagnosis, the LED function will display a green light. When the module communicates on the RIO network, the Com Act LED displays green. There is a red fault LED indicating that communication with one or more I/O modules is not possible. For communication errors on channel A, the error A LED is displayed in red. Finally, the fault B LED displays red, along with error A, indicating an invalid node address.

Maintain stability at extended operating temperatures of -13 to 158 degrees Fahrenheit. In addition, the coating provides protection and insulation to prevent corrosion caused by high dust environments, chemical contact, condensation droplets, or the influence of moisture.

This module has also obtained ATEX zone 2/22 certification, which includes intensive, comprehensive, and detailed testing and inspection processes. According to these procedures, certified products like this will also receive a report outlining the results and confirming that they meet the set standards.

This module is a remote I/O sub station single channel module used to transfer data between I/O modules installed on the same RIO sub station backplane and RIO heads on the CPU backplane. It transmits data bi-directional through a coaxial cable network.

SCHNNEIDER 140CRA93100 RIO远程适配器模块    相关产品：

SCHNEIDER 140CPU65260量子单位处理器

SCHNEIDER 140CPU11302 控制器

SCHNEIDER PC-E984-685 Regulator Module

SCHNEIDER 140CRP93200 Remote Input modul